Remove vibration absorber on the trunk lid

NOTE: RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.

Protect working area.
Handle tools and components carefully.

Preliminary work

Refer to REMOVING THE WIPER ARM OF THE REAR WIPER .
Refer to REMOVING THE TOP TRIM FOR THE REAR WINDOW FRAME .
Refer to REMOVING THE TRIM FOR THE LEFT AND RIGHT SIDE REAR WINDOW FRAMES .
Refer to REMOVING THE POWER TAILGATE SWITCH .
Refer to REMOVING TRUNK COMPARTMENT LIGHT ON TRUNK LID .
Refer to REMOVING TAILGATE TRIM PANEL .
Refer to REMOVING REAR WINDOW WIPER MOTOR .

Release the screws (1) and remove the vibration absorber on the trunk lid (2) .

Courtesy of BMW OF NORTH AMERICA, INC.