Securing upper wishbone, right, at the swivel bearing

Fastening the wishbone to the top of the swivel bearing 

• Position the pin of the top control arm (3)  in the bore of the swivel bearing (4)  .
• Replace the screw (2)  and the nut (1)  .

  Parts:  Bolt and nut

• Insert screw (2)  .
• Tighten nut (1)  .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Upper wishbone to swivel bearing
  M10 Replace screw and nut.	Tightening torque	56 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove the special tool for attaching the swivel bearing.