Removing the top right and left cover in the engine compartment
Remove the cover in the engine compartment on top
- Release the seal for the hood (1) in the cover area (2) at the clips with the special tool 2 298 505 .
- Release the expanding rivets (arrows).
- Guide out and remove the cover (2) .
Remove the top right cover in the engine compartment
- Release the seal for the hood (1) in the cover area (3) at the clips with the special tool 2 298 505 .
- Release the expanding rivets (arrows).
- Open and remove the cover (2) of the washer fluid reservoir.
- Guide out and remove the cover (3) .