Removing the right intake silencer bracket

• Release screw (1)  on the holder of the expansion tank of the low-temperature coolant circuit.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the screws in area (1)  .
• Set aside expansion tank (2)  of the low-temperature coolant circuit with the holder.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1)  .
• Release the nut (2)  .
• Remove holder (3)  of the right intake silencer.

Courtesy of BMW OF NORTH AMERICA, INC.