Releasing the front left and right brake calipers

NOTE: Description is for left component only. Procedure on the right side is identical.

Releasing the front brake caliper

Release the brake hose (1) from the holders (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Remove cable (2) from holder (3).
Only left: Remove cable (1) from holder (3).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
The screws must remain screwed in and must not be loosened.

The screws (1) must not be released.

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws (1).
Detach the brake caliper from the swivel bearing in the arrow direction.

Courtesy of BMW OF NORTH AMERICA, INC.
Tie up the brake caliper (1) with the special tool 2 413 317.
Do not hang the brake caliper from the brake hose.

Courtesy of BMW OF NORTH AMERICA, INC.