Fastening the positive battery cables
NOTE:
RISK OF DAMAGE
Damage to wires when disconnecting connectors and plug connections.
Sheared wires can cause a short circuit.
Damage to wires when disconnecting connectors and plug connections.
Sheared wires can cause a short circuit.
- Do not pull on wires when disconnecting connectors and plug connections.
NOTE:
RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.
Electrostatic discharge.
Damage to or destruction of electrical components.
- Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
- For additional information see: NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE)
NOTE:
To provide a better overview: Illustration of surrounding parts removed.
- Fix the clip (2) .
- Tighten down screw (4)
.TIGHTENING TORQUES SPECIFICATION
Hexagon screw M6 with threaded bolt M5 Screw M6 with threaded bolt M5 tightening torque 10 Nm - Position the grounding point (5) .
- Tighten nut (3)
.TIGHTENING TORQUES SPECIFICATION
Ground cable on cylinder head cover/ground pin Nut M5 tightening torque 4.6 Nm - Tighten down screw (1)
.TIGHTENING TORQUES SPECIFICATION
Wiring harness to cylinder head cover M6x16 screw tightening torque 10 Nm - Position the wiring harness (3) .
- Fix wiring harness mountings (2) .
- Tighten down screw (1)
.TIGHTENING TORQUES SPECIFICATION
Wiring harness to cylinder head cover M6x16 screw tightening torque 10 Nm