11 11 Engine Block (X5 M)
1111 TIGHTENING TORQUE OVERVIEW
| Angled screw connection to crankcase | ||
| M8x37 Flanged head screw 10.9 Flat-head screw 10.9 |
Joining torque | 10 Nm |
| Angle of rotation | 45° | |
| Bearing cap to crankcase (ASA (ASA) collar screw) | ||
| M11x99 Replace screws. Screw in hand-tight. |
Joining torque | 20 Nm |
| Angle of rotation | 125° | |
| Bearing cap to crankcase (ASA collar screw 10.9) | ||
| M8X70 Replace screw. |
Joining torque | 10 Nm |
| Angle of rotation | 63° | |
| Bearing cap to crankcase | ||
| M9x53 Replace screw. |
Joining torque | 20 Nm |
| Angle of rotation | 100° | |