Installing the right strut brace
NOTE:
TECHNICAL INFORMATION
Driving without the strut brace/front-end strut or tension strut is not permitted.
Driving without the strut brace/front-end strut or tension strut is not permitted.
- Install strut brace (3).
- Replace screws (2).
Parts: Screw
- Tighten the screws (2).TIGHTENING TORQUES SPECIFICATION
Strut brace M10x55 screw Replace screws Joining torque 56 Nm Angle of rotation 90° - Tighten the screws (1).TIGHTENING TORQUES SPECIFICATION
Front-end strut to strut brace Torx screw M8x30 Joining torque 28 Nm Angle of rotation 90°
Follow-up work
- Refer to INSTALLING ACOUSTIC COVER .