Prepare the mobile table lift

Mobile lifting table 

Courtesy of BMW OF NORTH AMERICA, INC.

• Stage the mobile table lift 2 184 136 .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Place the mounting element from the set of special tools 2 305 379 ready.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Work surface A (mounting for the engine): 

  Position the mounting element (1) with the mount 80  with the coordinates 7/2  and 7/7  .

  Position the mounting element (2) with the mount 60  with coordinates 3/2  and 3/7  .

  Position the mounting element (5) with the mount for the pivot bearing for the coordinates 4/1  and 5/8  .

• Work surface B (mounting for the transmission): 

  Position the mounting element (3) with the mount 80  for coordinates 7/4  .

  Position the mounting element (4) with the mount 50  for coordinates 2/4  and 3/7  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Adjust the inclination of the lifting table (1) with the adjustment screw (2) until the bubble level of the lifting table (1) displays the correct position.

Courtesy of BMW OF NORTH AMERICA, INC.