Installing the brake caliper at the front left and right

NOTE: Description is for left component only. Procedure on the right side is identical.

• Insert the brake caliper (2).
• Replace screws (1).

  Parts:  Screws

• Tighten down screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Brake caliper/brake anchor plate at front swivel bearing
  M12 Replace screw.	Tightening torque	130 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Hook the grommet (1) of the brake hose (2) into the holder (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in the cable bracket (3).
• Connect connectors (2) and lock.
• Close the housing (1).

Courtesy of BMW OF NORTH AMERICA, INC.