Installing the transmission oil cooler

• Feed in and install transmission oil cooler (1).
• Tighten screw (2) by hand.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten screw (1) by hand.
• Tighten screw (2) by hand.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Transmission oil cooler to crankcase
  M6	Tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (3).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Transmission oil cooler to crankcase
  M6	Tightening torque	8 Nm

• Tighten the screws (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Transmission oil cooler to crankcase
  M6	Tightening torque	8 Nm

• Secure clamps (1).
• Connect the transmission oil lines (2).
• Press the locking mechanism (1) in the arrow direction and lock the transmission oil lines (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock coolant line (2).

  Coolant line (2) must engage audibly.

• Connect and lock coolant line (1).

  Coolant line (1) must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to CONNECTING THE COOLANT LINE TO THE RADIATOR .
• Refer to FILLING THE HIGH-TEMPERATURE COOLING SYSTEM WITH THE VACUUM FILLING EQUIPMENT .
• Refer to VENTING THE HIGH-TEMPERATURE COOLANT SYSTEM .
• Refer to CHECKING THE HIGH-TEMPERATURE COOLING SYSTEM FOR WATERTIGHTNESS .
• Refer to CHECKING/TOPPING UP THE OIL LEVEL IN THE AUTOMATIC TRANSMISSION .
• Refer to INSTALLING THE FRONT BOTTOM RIGHT WHEEL ARCH COVER .
• Refer to INSTALLING UNDERBODY PROTECTION AT REAR .
• Refer to INSTALLING THE CENTER UNDERBODY PROTECTION .
• Refer to INSTALLING THE FRONT UNDERBODY PROTECTION .