1161 INTAKE SYSTEM (X4 xDrive30i 2019-2021)
1161 TIGHTENING TORQUE OVERVIEW
| Holder for intake system to cylinder head/crankcase | ||
| M6 | Tightening torque | 10 Nm |
| Holder for wiring harness to intake system | ||
| screw | Tightening torque | 5 Nm |
| Intake plenum holder on engine | ||
| BM6x16 | Tightening torque | 10 Nm |
| Intake plenum to cylinder head Observe tightening sequence. |
||
| M6 | Tightening torque | 10 Nm |
| Intake plenum to cylinder head | ||
| M6 | Tightening torque | 10 Nm |
| Intake system to holder front/rear | ||
| Tightening torque | 8 Nm | |
| Tank vent line to intake system | ||
| Tightening torque | 5 Nm | |