Removing the cover on the rear bumper cover
Preliminary work
- Refer to REMOVING THE LEFT AND RIGHT FLAPS FROM THE LUGGAGE COMPARTMENT TRIM PANEL .
- Refer to REMOVING WARNING TRIANGLE .
- Refer to REMOVING BOTH LOWERING D-PILLAR TRIM PANELS .
- Refer to REMOVING THE LEFT AND RIGHT TAIL LIGHT FROM THE SIDE PANEL .
- Refer to REMOVING TRIM FROM THE WATER CHANNEL .
- Refer to REMOVING LEFT REAR REFLECTOR .
- Refer to REMOVING RIGHT REAR REFLECTOR .
- Refer to REMOVING REAR BUMPER PANEL .
NOTE:
The description is provided only at one component. The procedure is the same for all other components.
- Unlock the detents (1).
- Take out the ultrasonic sensor (2) and let it hang on the wiring harness.
- Release the cover (1) along the dotted line on the detents (2) and remove it.