Grease the brake pads, the brake anchor plate and the brake caliper with the brake pad paste (17-inch low brake)

Clean the contact surfaces (1) of the brake pistons (4 pieces) with brake cleaner.
Check dust covers (2) for damage. Replace if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.
Replace the sliding plates (1).
Parts: Sliding plates
Mount the sliding plates (1).
Make sure that the sliding plates (1) fit correctly in the guides.

Courtesy of BMW OF NORTH AMERICA, INC.
Clean supporting surfaces (1) for the brake pads on the brake caliper.
If possible, do not clean the supporting surfaces mechanically in order to avoid damaging the surface coating.

Apply a thin coat of the brake pad paste to the contact surfaces (1).

CONSUMABLE SPECIFICATION

Brake block paste *TU= Trade Unit. TU	3g, Bag	83192158851
numbers cannot be ordered! For invoicing purposes only.	100 g, Tube	83192158852
	5g, TU*	83230140233

Courtesy of BMW OF NORTH AMERICA, INC.