Install the rear view camera (RFK)

Check 

• Check detents (1) on frame (2) for damage.

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

» Detents (1) are damaged.

Measure

• Replace frame (2).

• Position the rearview camera (3) in the frame (4).
• Clip in the holder (2) on both sides into the detents (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Join the rearview camera (2) completely with the holder and the frame in the bumper cover at the rear and clip it in with the detents (1).
• Connect connectors and lock.

Courtesy of BMW OF NORTH AMERICA, INC.