5171 Gaskets And Loose Body Parts
5171 TIGHTENING TORQUE OVERVIEW
| Adjusting element spoiler on trunk lid | ||
| M5 screw | Tightening torque | 2.7 Nm |
| Firewall lower part | ||
| Hexagon screw | Tightening torque | 3 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |
| Connecting support on tunnel to body | ||
| M8x25 screw | Tightening torque | 20 Nm |
| Cover, steering unit | ||
| Screw | Tightening torque | 3 Nm |
| Cowl upper part | ||
| Hexagon screw | Tightening torque | 3 Nm |
| Rear spoiler to trunk lid | ||
| M6 hexagon nut | Tightening torque | 6 Nm |
| Side sill trim panel | ||
| screw | Tightening torque | 3 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |
| Tension strut on firewall | ||
| M10x25 screw Replace screw. |
Joining toruqe | 56 Nm |
| Angle of rotation | 90° | |
| Tension strut to shock tower | ||
| Torx bolt Replace screw. |
Joining torque | 56 Nm |
| Angle of rotation | 90° | |
| Wheel arch cover | ||
| Screw | Tightening torque | 3 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |
| Wheel arch cover (nuts) | ||
| Plastic nut | Tightening torque | 2.6 Nm |
| Wheel arch cover (screws) | ||
| Thermoplastic hexagon screw | Tightening torque | 3 Nm |