Installing the operating facility in the center console

• Feed the operating unit in the center console (3) into the center console trim in the arrow direction.
• Check the detents (2).
• Replace screws (1).

  Parts:  Screws

• Tighten down screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Operating facility in the center console on center console trim
  Screw TS5x12 Replace screws.	Tightening torque	1.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE CENTER CONSOLE TRIM .
• Refer to ACTIVATING ELECTRICAL SYSTEM .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .