Disconnect the bleeder unit for the brake fluid

• Switch off bleeder unit (1) and remove it from the brake fluid expansion tank.
• Check the brake fluid level and adjust it to the maximum mark if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Check the seal (1) of the sealing cap for damage, replace if necessary.
• Mount the sealing cap on the brake fluid expansion tank.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to PERFORM THE CBS RESET .
• Refer to IF INSTALLED: CHECKING THE GAS PRESSURE SPRINGS FOR HOOD (ONLY FOR VERSIONS WITH ACTIVE PEDESTRIAN PROTECTION (SA8TF)) .