Installing the special tool on the cylinder head

• Prepare special tool 2 459 012 .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock the locks (arrows).
• Feed out the wiring harness section (1) for sensor system 2 and place to one side.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Thread in special tool 2 459 012 and position.
• Tighten down screws (1).

TIGHTENING TORQUES SPECIFICATION

Special tool to cylinder head
M8	Tightening torque	21.5 Nm

Courtesy of BMW OF NORTH AMERICA, INC.