Fasten the positive battery cable on the power distribution in front

WARNING: Working on 12V electrical system. 
Risk of short circuits! Risk of fire! 

• Make sure that there is no charger  connected to the jump start terminal in the engine compartment.
• Detach battery ground lead from battery.
• For auxiliary batteries: Detach battery minus cables from all auxiliary batteries.

• Position the positive battery cable.
• Tighten nuts (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Positive battery cable
  Positive pole screw	tightening torque	15 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the cover (1) in a downwards direction.
• Engage the cover (1) in the detents (2).

Courtesy of BMW OF NORTH AMERICA, INC.