Lowering the engine and detaching the engine bridge
- Turn the special tool 2 361 506 (00 6 103)
to lower the engine until it lies completely on the engine mounts.
- Release the special tool 0 490 579 (11 0 070) from the mounting brackets (1) and (2) .
- Remove the special tool 0 490 579 (11 0 070)
from the engine bridge.NOTE: TECHNICAL INFORMATION
Conduct the following operation with the assistance of a second person. - Carefully remove the engine bridge (1)
with help from a support person.
- Version without front mounting bracket:
Loosen the screws (1) from the special tool 2 459 012 .
Guide out and remove the special tool 2 459 012 on the cylinder head.