Replacement: Remount crankshaft sensor
- For timing case cover replacements:
Remount crankshaft sensor.
NOTE:
RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.
Electrostatic discharge.
Damage to or destruction of electrical components.
- Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
- For additional information see: NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .
- Loosen the screw (1) and remount the crankshaft sensor (2) .
- Tighten down screw (1) .
TIGHTENING TORQUES SPECIFICATION
| Crankshaft sensor to timing case cover | |
| Tightening torque | 4.6 Nm |