Replacement: Remounting the oil feed line
Remove oil feed line
- Loosen screw (1)
.
- (2)
Remove oil feed line.
 Courtesy of BMW OF NORTH AMERICA, INC.
|
Install oil feed line
- Replace the O-rings (1)
.
Parts:
O-rings
 Courtesy of BMW OF NORTH AMERICA, INC.
|
- Position oil feed line (2)
on turbocharger.
- Tighten down screw (1)
.
TIGHTENING TORQUES SPECIFICATION
| Oil feed line to turbocharger |
| M6 x 12 |
tightening torque |
8 Nm |
Courtesy of BMW OF NORTH AMERICA, INC.
|