1113 Engine Oil Pan
1113 TIGHTENING TORQUE OVERVIEW
| Oil deflector to crankcase | ||
| M8 x 35 Replace screws. |
Joining torque | 15 Nm |
| Angle of rotation | 45° | |
| Oil drain plug | ||
| M12x16 Replace the sealing ring. |
Tightening torque | 25 Nm |
| Oil sump to crankcase | ||
| M8 x 110 | Tightening torque | 24 Nm |
| Oil sump to crankcase | ||
| M8 x 30 | Tightening torque | 24 Nm |
| Transmission to oil pan | ||
| M8 x 50 | Tightening torque | 19 Nm |
| Oil level sensor to oil sump | ||
| M6 | Tightening torque | 8.5 Nm |