Installing the bumper cover lower section

• Guide in tether.
• Clip cover (1) of towing eye into detents (2) and (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Slightly spread apart the detents (1) and insert the ultrasonic sensors (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip bumper cover lower section (2) into detents.
• Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Bumper trim panel lower part
screw	Tightening torque	3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connector (1).

Courtesy of BMW OF NORTH AMERICA, INC.