Remove the right D-pillar trim panel
Preliminary work
- Refer to REMOVING REAR WINDOW STORAGE SHELF AT FRONT .
- Refer to REMOVING FLAP IN LUGGAGE COMPARTMENT TRIM PANEL ON RIGHT .
- Refer to REMOVING THE COVER IN THE RIGHT SEAT BELT FINISHER STRIP .
- Refer to REMOVING RIGHT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
- Refer to REMOVING THE LOWER RIGHT D-PILLAR TRIM PANEL .
- Refer to REMOVING THE COVER FOR THE LUGGAGE COMPARTMENT ON THE RIGHT .
- Refer to REMOVING THE LUGGAGE COMPARTMENT LAMP IN THE RIGHT LUGGAGE COMPARTMENT .
- Refer to REMOVING THE LUGGAGE COMPARTMENT TRIM PANEL ON THE RIGHT .
- Refer to REMOVING RIGHT C-PILLAR TRIM PANEL .
NOTE:
Description is for left component only. Procedure on the right side is identical.
Remove the D-pillar trim panel
- Have the set of special tools 0 493 752 (00 9 329)
ready.
- Loosen expanding rivet (1).
- Loosen screws (2).
- Place a suitable special tool between the sealing lip on the tailgate seal and the D-pillar trim panel (3).
- Loosen D-pillar trim panel (3) from the clip (4) and from the clamps (5).
- Unclip D-pillar trim panel (1) from the clips (2) and remove.