Supplying the new parts required
NOTE:
TECHNICAL INFORMATION
Notes on component bonding using adhesive tape form the basis for these repair instructions and must be observed without fail.
For additional information see: NOTES ON COMPONENT BONDING WITH ADHESIVE TAPE .
Notes on component bonding using adhesive tape form the basis for these repair instructions and must be observed without fail.
For additional information see: NOTES ON COMPONENT BONDING WITH ADHESIVE TAPE .
Preliminary work
- Refer to REMOVING REAR LEFT OR RIGHT WHEEL .
- Prepare the following new parts (see applicable BMW parts catalogue):
Wheel housing panels primed (1)
Adhesive pad (2)