Installing the guide for the rear bumper panel at the side

NOTE: Description is for left component only. Procedure on the right side is identical.

• Correctly position the guide for the rear bumper panel at the side (3).
• Tighten nuts (1).

TIGHTENING TORQUE SPECIFICATIONS

Bumper guide to body
Nut	Tightening torque	4.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (2).

TIGHTENING TORQUE SPECIFICATIONS

Bumper panel, rear
Hexagon screw	Tightening torque	2.5 Nm

• Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Bumper panel, rear
Hexagon screw	Tightening torque	2.5 Nm

Courtesy of BMW OF NORTH AMERICA, INC.