Installing the side trim

• Install the trim (1) and engage it at the detents (arrows).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install the ultrasonic sensor (2) and snap it in at the detents (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE REINFORCEMENT ON THE BUMPER COVER .
• Refer to INSTALLING BUMPER COVER, FRONT .
• Refer to PARTIALLY INSTALLING THE FRONT SECTIONS OF BOTH WHEEL ARCH COVERS AT THE FRONT .
• Refer to PARTIALLY INSTALLING THE LEFT AND RIGHT FRONT WHEEL ARCH TRIM .
• Refer to INSTALLING FRONT ORNAMENTAL GRILLE .