Install bumper cover upper section at front

NOTE: Perform the steps on the left and right side.

• Slip fog light support (2) into guide (4) of bumper cover upper section and clip into detents (3).
• Clip in the expanding rivet (1).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Perform the steps on the left and right side.

• Clip bumper brackets (2) into detents (3).
• Tighten down screw (1).

TIGHTENING TORQUE SPECIFICATIONS

Bumper bracket, side front
screw	Tightening torque	3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

• Insert vehicle wiring harness (1) into guides of bumper cover upper section.

Courtesy of BMW OF NORTH AMERICA, INC.