Remove the bumper cover lower section

Disconnect the connector (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws (1).
Release and remove bumper cover lower section (2) from the detents.

Courtesy of BMW OF NORTH AMERICA, INC.
Slightly spread detents (1) and remove the ultrasonic sensors (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Unclip cover (1) of the towing eye from the detents (2) and (3).
Thread out the tether and remove the cover (1) of the towing eye.

Courtesy of BMW OF NORTH AMERICA, INC.