Remove all special tools
- Release the screws (4) from the set of special tools 2 471 127.
- Guide out the setting gauge 0.5°(2) from the special tool 2 471 127 between the exhaust camshaft and the basic carrier (1) and remove.
- Guide out the setting gauge 0.7°(3) from the special tool 2471 127
between the intake camshaft and the basic carrier (1) and remove.
- Release the screws (1) from the set of special tools 2 471 127.
- Guide out the basic carrier (2) from the special tool 2 471 127
and remove.
- Guide the special tool 2 288 380
out and remove.
- Guide the special tool 0 493 380 (11 6 480)
out and remove.
- Guide the special tool 2 455 654
out and remove.