Install rear door trim

• Check the clips (1)  for damage and replace if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip the detents of the door wiring harness (1)  into the door trim panel (2)  .
• Connect door wiring harness connector (1)  to door trim panel (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Attach Bowden cable (1)  of door opener onto door lock (3)  first and then to the counter support (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert locking rod through opening in door trim panel (1)  .
• Clip in door trim panel (1)  with the clips (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (1)  and (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Check 

• Check detents (arrows) of the trim of the handle (1)  for damage.

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

» The detents (arrows) of the trim (1)  of the handle are damaged.

Measure

• Replace trim (1)  of the handle.

• Position and lock trim (1)  of the handle in arrow direction with guide (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.