3452 Stability Control System
3452 TIGHTENING TORQUE OVERVIEW
| DSC control unit on hydraulic unit | ||
| Screw Replace screws. Screw in screws and evenly tighten crosswise. |
1. tightening torque | 1.5 Nm |
| 2. tightening torque | 2.5 Nm | |
| Position the 3rd tightening torque | 3.5 Nm | |
| Wheel RPM sensor to swivel bearing | ||
| M6 Replace screw. |
tightening torque | 12 Nm |