Installing front wheel arch trim

• Check clips (1)  for damage and replace if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.

Check 

• Check detents (1)  for damage.

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

» Detent (1)  of the wheel arch trim is damaged.

Measure

• Replace wheel arch trim.

• Snap the wheel arch trim (1)  into the locks (2)  on the front side panel.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in wheel arch trim (2)  and engage on the clips (3)  .
• Replace the blind rivets (1)  .

  Parts:  Blind rivet

• Mount blind rivet (1)  using the special tool 0 496 521 (00 2 230) .

Courtesy of BMW OF NORTH AMERICA, INC.