Removing the front trim strip
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING FRONT ORNAMENTAL GRILLE .
- Refer to PARTIALLY REMOVING THE LEFT AND FRONT RIGHT WHEEL ARCH TRIM .
- Refer to PARTIALLY REMOVING THE FRONT SECTIONS OF BOTH WHEEL ARCH COVERS AT THE FRONT .
- Refer to REMOVING FRONT BUMPER COVER .
- Refer to REMOVING THE ORNAMENTAL GRILLE FROM THE FRONT BUMPER COVER AT SIDE .
- Refer to REMOVING FRONT SIDE BUMPER COVER INLAY .
- Loosen nuts (1) .
- Release and remove the trim strip (2) from the detents (arrows).