Installing the bracket for the electric coolant pump on the component carrier

• Feed in and position the holder (2) of the electric coolant pump.
• Tighten down screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Electric coolant pump holder on component carrier
  M6X20	tightening torque  8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1).

TIGHTENING TORQUES SPECIFICATION

Electric coolant pump holder on component carrier
M6X20	tightening torque  8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.