37 14 511 Replacing front ride-height sensor

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Release nut (1) and disconnect jointed rod (2).

Tightening torque 37 14 4AZ .

Unfasten screws (2).

Tightening torque 37 14 3AZ .

Remove ride-height sensor and disconnect plug connection.

Fig 1: Identifying Ride-Height Sensor With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

After installation:

Carry out RIDE-HEIGHT ADJUSTMENT (on vehicles with VDC).
Check HEADLIGHT SETTING , correct if necessary.