32 00 620 Adjusting rear axle
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
A camber change always means a toe change as well. The camber must therefore be adjusted first.
Adjusting camber:
Renew nut (1) and eccentric bolt (2) and tighten to 5 Nm.
Turn eccentric bolt (2) to adjust camber to setpoint value.
Tighten nut (1).
Tightening torque 33 32 10AZ .
Adjusting toe:
Renew nut (2) and eccentric bolt (1) and tighten to 5 Nm.
Turn eccentric bolt (1) to adjust toe to setpoint value.
Tighten nut (2).
Tightening torque 33 32 7AZ .