Remove top clean air pipe
WARNING:
Hot surfaces.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
Preliminary work
- Remove right fRONT-END STRUT .
- Remove intake silencer HOUSING .
WARNING:
Hot surfaces.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
- Unfasten clamp (1).
- Remove resonator (3) from the rubber mounts.
- Feed out clean air pipe (2) with the resonator (3) on the top and remove.
- Unlock the locks (1).
- Feed out upper clean air pipe (2) from resonator (3) and remove.