LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2021
>>
X3 xDrive30i
>>
Repair and Diagnosis
>>
Engine Mechanical
>>
Lubrication System
>>
Engine Oil Cooler, Water Pump, Thermostat, Coolant Lines -- Repair (G01)
>>
11 53 Thermostat And Engine-Mounted Coolant Lines
>>
11 53 015 Removing and installing/replacing heat management module (X3 4-cyl. models except PHEV, 2020-2022)
>>
Replacing heat management module
Replacing heat management module
Unlock and release the coolant line (1) on the heat management module (2).
Replace the heat management module (2).
Parts:
Heat management module
Courtesy of BMW OF NORTH AMERICA, INC.
Feed in and install the coolant line (1) on the heat management module (2).
Make sure that the coolant line (1) engages audibly.
Courtesy of BMW OF NORTH AMERICA, INC.
Courtesy of BMW OF NORTH AMERICA, INC.