Install reinforcement strut
- Feed in reinforcement strut (2).
- Tighten the screws (1).
TIGHTENING TORQUES SPECIFICATION
| Front reinforcement strut | ||
| Screw | Tightening torque | 24 Nm |
Follow-up work
- Install the top AIR FLAP CONTROL/AIR DUCT .
- Install the front hood SEAL .
- Install front BUMPER COVER .
- Partly install the front sections of both front wheel arch COVERS .
- Partially install both front wheel ARCH TRIMS .
- Install front ORNAMENTAL GRILLE .