Installing the cover of the front bumper cover

• Install the cover (1) and snap it in at the detents (2) along the dotted line.

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: The description is for one component only. The procedure is identical for all further components.
• Install the ultrasonic sensors (2) and snap it in at the detents (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: Perform the steps on the right and left side.
• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install the front bumper cover ORNAMENTAL GRILLE .
• Install front bumper COVER .
• Partly install the front sections of both front wheel ARCH COVERS .
• Partially install both front wheel ARCH TRIMS .
• Install front ORNAMENTAL GRILLE .