Installing wheel arch trim, front right

• Check the clips (1) for damage and replace where required.

Courtesy of BMW OF NORTH AMERICA, INC.

Check 

• Check detents (1) for damage.

  Courtesy of BMW OF NORTH AMERICA, INC.

  Result 

  » Detent (1) of the wheel arch trim is damaged.

  Measure

  • Replace wheel arch trim.
• Snap the wheel arch trim (1) into the locks (2) on the front side panel.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in wheel arch trim (2) and engage on the clips (3).
• Replace the blind rivets (1).

  Parts:  Blind rivet

• Mount blind rivet (1) using the special tool 0 496 521 (00 2 230)  .

Courtesy of BMW OF NORTH AMERICA, INC.