Remove clean air pipe

Preliminary work 

• Remove right FRONT-END STRUT
• Remove intake silencer HOUSING 

• Release the coolant lines (1) from the holders (arrows).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen clamp (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock the clamp (1).
• Thread out the clean air pipe (2) with the resonator and set aside.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the clean air pipe (1) with the resonator.
• Unlock and pull off the engine ventilation line (2).
• Feed out and remove the clean air pipe (1) with the resonator.

  Courtesy of BMW OF NORTH AMERICA, INC.