Install clean air pipe

Check the seal (1) for damage, replace it if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.

Replacing the damaged seal

NOTE: TECHNICAL INFORMATION
Use of sharp or pointy tools for installation or removal is prohibited.
Remove damaged seal.
Clean the gasket groove (1) with a dry cloth.
The gasket groove (1) must be clean.

Courtesy of BMW OF NORTH AMERICA, INC.
Replace gasket.
Parts : Gasket
Install the seal dry without lubricant or mounting agent.
NOTE: TECHNICAL INFORMATION
Incorrect assembly is possible. Ensure correct installation position.
Thread in seal and install.
Make sure that the seal is installed correctly in the gasket groove (1).
Make sure that the sealing lip (2) is directed to the inside as shown.

Courtesy of BMW OF NORTH AMERICA, INC.
Feed in and position the clean air pipe (1) with resonator.
Connect engine ventilation line (2) and lock.
The engine ventilation line (2) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.
Feed in and install the clean air pipe with resonator (2).
Lock clamp (1).
The clamp (1) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.
Secure clamps (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Fasten the coolant line (1) on the holders (arrows).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work