Install exhaust camshaft adjuster
Exhaust camshaft adjuster
Overview graphic of the exhaust camshaft adjuster
7
608
Exhaust camshaft adjuster
8
789
617
Exhaust camshaft adjuster
8
693
684
921
Exhaust camshaft adjuster
NOTE:
TECHNICAL INFORMATION
After replacing one or more VANOS central valves or VANOS adjusters:
When removing, make note of the identification/part number of the VANOS central valve or VANOS adjuster and consider writing it down.
It must be replaced with a VANOS adjuster or VANOS central valve with the same part number. A mixed installation is not allowed.
Read out the vehicle I-level and proceed accordingly.
Be absolutely certain to pay attention to PuMA measure 64122020.
For further information, see the applicable BMW Parts Catalog.
After replacing one or more VANOS central valves or VANOS adjusters:
When removing, make note of the identification/part number of the VANOS central valve or VANOS adjuster and consider writing it down.
It must be replaced with a VANOS adjuster or VANOS central valve with the same part number. A mixed installation is not allowed.
Read out the vehicle I-level and proceed accordingly.
Be absolutely certain to pay attention to PuMA measure 64122020.
For further information, see the applicable BMW Parts Catalog.
- Lay out the exhaust camshaft adjuster marked with EX (arrow).
- Feed in exhaust camshaft adjuster (1) in the timing chain (2) and position on the exhaust camshaft (3).
- Abut VANOS central valve (1) of exhaust side.