Removing the bumper cover upper section at the front

• Release vehicle wiring harness (1) from guides of bumper cover upper section and remove.

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: Perform the steps on the left and right side.
• Loosen screw (1).
• Release bumper bracket (2) from clips (3) and remove.

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: Perform the steps on the left and right side.
• Loosen expanding rivet (1).
• Release fog light support (2) from clips (3), take out of the guide (4) and remove from bumper cover upper section.

Courtesy of BMW OF NORTH AMERICA, INC.