Installing the trim panel of the rear luggage compartment

NOTE: Description is for left component only. Procedure on the right side is identical.

Connect connectors and lock.
Position the trim panel (2) of the luggage compartment.
Tighten the screws (1).

TIGHTENING TORQUES SPECIFICATION

Luggage compartment trim panel to body
Thermoplastic ovalhead screw	Tightening torque	2.6 Nm

G14316411

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Install the bottom d-pillar TRIM PANEL .
Install d-pillar TRIM PANEL .
Install c-pillar TRIM PANEL .
Install left luggage compartment wheel arch TRIM PANEL .
Install the backrest side section on the rear SEAT BACKREST .
Install the cover of the seat belt FINISHER STRIP .
Install the flap in left luggage compartment TRIM PANEL .
Install luggage compartment ROLLER COVER .