LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2021 >> X3 xDrive30e >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Engine Electrical System -- Repair (2 Of 2) (G01) >> 12 51 Engine Wiring Harness >> 12 51 235 Remove and install/replace Module 1, sensor system engine wiring (X3 xDrive 30i, 2020-2021) >> Notes

12 51 235 Remove and install/replace Module 1, sensor system engine wiring (X3 xDrive 30i, 2020-2021): Notes

WARNING: Heavy component falling down or tipping.
Danger! Immobilization period-threatening injuries! 
  • Before lowering or removing the front axle: Secure the engine in the installation position.
  • For additional information see: 11 00 670 Securing engine in INSTALLATION POSITION .
WARNING: Car may slip off the vehicle hoist where components are supported.
Danger! Immobilization period-threatening injuries! 
  • Secure the vehicle hoist against lowering and lifting.
WARNING: Vehicle may slip off the vehicle hoist if the vehicle hoist is handled incorrectly.
Danger! Immobilization period-threatening injuries! 
  • Observe safety instructions on raising the vehicle using a vehicle hoist.
  • For additional information see: 00... Raise the vehicle using a VEHICLE LIFT. .
WARNING: Car may slip off the vehicle hoist if the weight is distributed unevenly.
Danger! Immobilization period-threatening injuries! 
  • Ensure there is a specific weight compensation on the car.